A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Kolhe, Kishor P.
- Optimisation of Bead Geometry of Pulsed GTAW Process for Aluminium Alloy 7039 Using Ar + He Gas Mixtures
Authors
1 Department of Mechanical Engineering, Delhi College of Engineering, Delhi, IN
2 Department of Mechanical Engineering, Agricultural University, Dapoli - Ratnagiri, IN
Source
Indian Welding Journal, Vol 42, No 4 (2009), Pagination: 26-33Abstract
The present paper depicts the application of pulsed gas tungsten arc welding (pulsed GTAW) for aluminium alloy (AA7039) using various Ar + He (Argon + Helium) mixtures as a shielding gas with sinusoidal AC wave. In this investigation, Taguchi method is used to formulate the experimental layout, to analyse the effect of each process parameter on the bead geometry, and to predict the optimum setting for each welding process parameter. The pulsed GTAW process is employed for a high rate of current rise and decay at a high pulse repetitive rate, which is widely used in the joining of precision parts. Zinc is usually added to improve mechanical properties through formation of hard intermediate phase, such as Mg2Zn. The main aim of pulsing is to achieve maximum penetration without excessive heat built-up. The use of high current pulses is to penetrate deeply and allow the weld pool to dissipate some of the heat during a proportionately of longer arc period at a lower current. AA7039 is employed in aircraft, automobiles, high-speed trains and high-speed ships due to their low density, high specific strength and excellent corrosion resistance.
Keywords
Pulsed GTA Welding, Aluminum Alloy 7039, Bead Geometry.- Studies on the Wear and Change in Microstructure of Weld-Joint of a Structural Steel
Authors
1 College of Agril. Engg. & Tech, Dapoli, IN
2 Delhi College of Engineering, Delhi, IN
Source
Indian Welding Journal, Vol 37, No 3&4 (2004), Pagination: 39-41Abstract
The wear characteristics of a multi-pass weld-joint, of a low carbon- manganese structural steel has been studied together with the characteristics of its varying microstructure and hardness at different locations. Attempts have been made to correlate the wear characteristics with the varying microstructure and the varying hardness values in the weld-joint. It is observed that the wear characteristics, e.g. wear rate and coefficient o f wear resistance are considerably dependent only on the microstructure. The various sub zone microstructures observed in the weld metal and HAZ on a SA weld are spherodized, partially transformed; grain refined and grain coarsened area exhibiting predominantly Widmanstatten ferrite with pearlite, with the others sub zones of HAZ reveal polygonal ferrite and pearlite. Depending on the number, size and distribution of inclusions, the weld microstructure varies because of the prevalence of varying cooling rates in weld metal, a wide range of microstructures such as periodic pearlite, grain boundary ferrite with pearlite and side place with cementite along the side plate boundaries. This study has been performed to investigation on the wear of a weld joint of a structural steel and variations in the microstructure at various regions of heat affected zone base metal and a weld metal.Keywords
Weld, HAZ, Wear, Weld Microstructure, HAZ Microstructure, Hardness.- Parametric Study of Submerged Arc Welding on Mild Steel
Authors
1 Department of Mechanical Engineering, College of Agricultural Engineering & Technology, Dapoli, IN
2 Department of Mechanical Engineering, Delhi College of Engineering, Bawana Road, Delhi - 42, IN